Nile Shears

Airtek Ltd. — 514-336-3820 — sales@airtekltd.com — www.airtekltd.com

Air Tools

Nile Pneumatic Tools

Heated Power Cutter
Air Shears
Wire Twister
Multi-Purpose Scissors
Mini Belt Sander
Air Twister
Pneumatic Saw & File
Back to the Nile Pneumatic Tools Main Page

Nile Heated Power Cutter

The blade is heated by a heater and these heat power cutters most suitable for cutters
are most suitable for cutting hard and break-easy plastics such as acrylic resins, etc.

A transformer is needed for the heat air nippers.
Blades are sold separately
Special blades are available upon special request.

AH10

control

HTR30N

cutter

FA50

Part #	OAL MM	Weight Grams	Diameter MM	Air Consumption CM3 / Stroke	Blade #	Cutting Capacity MM
AH10	200	560	45	130	FA50	4.5 (Hard Plastics)
AH12	200	570	45	131	FA50	5.5 (Hard Plastics)

Temperature of the Blade 90°C - 150°C
Needing 25 Minutes to get to maximum temperature.

^Top

Air Shears

Suitable for narrow plate, plastic plate and wire net

ASP
(With pressure increase mechanism)

Part #	OAL MM	Weight Grams	Diameter MM	Air Consumption CM3 / Stroke	PSI	Cutting Capacity MM
AS-100	139	230	36	116	62-85	0.5 Plate
AS-200	166	500	45	230	62-85	1.0 Plate
ASP-150	211	300	36	223	62-85	0.8 Plate
ASP-250	253	720	45	500	62-85	1.2 Plate

^Top

Wire Twister

When the lever is pressed, the blade catches the wire and rotates to twist it.

SP-40W

Before

wire

After

WT-06

Part #	OAL MM	Weight Grams	Diameter MM	Air Consumption M3 / Min	PSI	Cutting Capacity
WT-06	225	800	38	0.45	70 - 85	1.0 MM Steel Wire 1.2 MM Copper Wire
SP40W	245	1200	38	0.45	70 - 85	1.2 MM Steel Wire 2.0 MM Copper Wire

^Top

Multi-Purpose Scissors

Versatile to cut a wide variety of materials, from light sheet metal to plastics as well as carpet.
Good for cutting and trimming thinner sheets of rubber or vinyl cloth, paper, etc.

Part #	OAL MM	Weight Grams	Diameter MM	Air Consumption M3 / Min	PSI
GS-01	140	500	36	0.45	55 - 85

Blade Part # 10M

^Top

Mini Belt Sander

Can be used for automobile body work and sheet metal processing, wood work, removing rough edges of small metal precisions parts, finishing, rust removal and polishing.

MB-20

For use in narrow confined spaces or for spot grinding.

MB-20S

sander

Its three point construction makes the grinding of flat surfaces easier.

Part #	Belt W x L MM	AOL MM	Weight Grams	Belt Speed @ Non-load	Air Consumption M3 / Min	PSI
MB-20	20 X520	250	930	2200 M / MIN	0.3	70 - 85
MB-20S	20 X520	250	1080	2200 M / MIN	0.3	70 - 85

^Top

Air Twister

3-5 Times faster hand operation

twister

Before & After

nile

Part #	OAL MM	Weight Grams	Diameter MM	Air Consumption M3 / Min	PSI
RC-6	180	830	38	0.45	70 - 85

^Top

Pneumatic Saw & File

It's a Saw!!! It's a File!!!

It cuts automobile panels and metal pipes, and all it takes for the user to get started is a small hole. With file, holes in sheet metal and be enlarged (to install a car antenna or other auto accessory), holes in panels can be better matched, molds filed, castings de-burred and paint scrapped.

It cuts an iron plate (thickness: 1mm)
At the rate of 400 mm a minute AF-5
At the rate of 900 mm a minute AF-10

Power boost switch for easy cutting thick materials.
Quiet operation and exhaust is away from user.
Rubber-covered body provides comfortable usage and a good grip.
Saw and file form a one-piece unit. Any ordinary hacksaws can be shortened and easily attached. (Only AF-10)

Part #	Body Length MM	Weight Grams	Grip Size MM	Air Consumption M3 / Min	PSI	Stroke MM	Standard Attachments
AF-5A	163	400	29	0.2	78 - 92	5	2 Saw Blades 1 Blade Holder 1 Each Flat, Round & Triangular Files
AF-10S	233	830	38	0.28	78 - 92	10	3 Saw Blades 1 Each Flat, Round & Triangular Files

^Top

Airtek (1990) Ltée, 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820