514-336-3820
514-745-1764
Cutting Tools
Airtek End Mills
- Multiple Flute Center Cutting Carbide Roughing
- 5 Flute Single End Carbide 45 Degree Helix
- 5 Flute Single End Carbide 45 Degree Helix - Long Length
- 3 Flute Single End Carbide 60 Degree Helix
- Two Flute Singe End Carbide 50 Degree Helix
- Two Flute Singe End Carbide 50 Degree Helix - Long Length
- Back to the Melin Main Page
Tolerance +.000 / - .004
| Part # | Mill Diameter |
Shank Diameter |
Flute Length |
Overall Length |
Number Flutes |
| CRMG-808 | 1/4 | 1/4 | 3/4 | 2-1/2 | 4 |
| CRMG-1010 | 5/16 | 5/16 | 13/16 | 2-1/2 | 4 |
| CRMG-1212 | 3/8 | 3/8 | 7/8 | 2-1/2 | 4 |
| CRMG-1616 | 1/2 | 1/2 | 1 | 3 | 4 |
| CRMG-2020 | 5/8 | 5/8 | 1-1/4 | 3-1/2 | 4 |
| CRMG-2424 | 3/4 | 3/4 | 1-1/2 | 4 | 4 |
| CRMG-3232 | 1 | 1 | 1-1/2 | 4 | 5 |
Tolerance +.000 / - .002
| Part # | Mill Diameter |
Shank Diameter |
Flute Length |
Overall Length |
| GMG-404 | 1/8 | 1/8 | 1/2 | 1-1/2 |
| GMG-605 | 5/32 | 3/16 | 9/16 | 2 |
| GMG-606 | 3/16 | 3/16 | 9/16 | 2 |
| GMG-807 | 7/32 | 1/4 | 3/4 | 2-1/2 |
| GMG-808 | 1/4 | 1/4 | 3/4 | 2-1/2 |
| GMG-1010 | 5/16 | 5/16 | 13/16 | 2-1/2 |
| GMG-1212 | 3/8 | 3/8 | 1 | 2-1/2 |
| GMG-1414 | 7/16 | 7/16 | 1 | 2-3/4 |
| GMG-1616 | 1/2 | 1/2 | 1-1/4 | 3 |
| GMG-1818 | 9/16 | 9/16 | 1-1/4 | 3-1/2 |
| GMG-2020 | 5/8 | 5/8 | 1-1/4 | 3-1/2 |
| GMG-2424 | 3/4 | 3/4 | 1-1/2 | 4 |
| GMG-3232 | 1 | 1 | 1-1/2 | 4 |
Tolerance +.000 / - .002
| Part # | Mill Diameter |
Shank Diameter |
Flute Length |
Overall Length |
| GMG-808-E | 1/4 | 1/4 | 1-1/2 | 4 |
| GMG-1212-E | 3/8 | 3/8 | 1-3/4 | 4 |
| GMG-1616-E | 1/2 | 1/2 | 3 | 6 |
| GMG-2424-E | 3/4 | 3/4 | 3 | 6 |
| GMG-3232-E | 1 | 1 | 3 | 6 |
Tolerance +.000 / - .002
| Part # | Mill Diameter |
Shank Diameter |
Flute Length |
Overall Length |
| EMG60-808 | 1/4 | 1/4 | 3/4 | 2-1/2 |
| EMG60-1010 | 5/16 | 5/16 | 13/16 | 2-1/2 |
| EMG60-1212 | 3/8 | 3/8 | 1 | 2-1/2 |
| EMG60-1414 | 7/16 | 7/16 | 1 | 2-3/4 |
| EMG60-1616 | 1/2 | 1/2 | 1-1/4 | 3 |
| EMG60-1818 | 9/16 | 9/16 | 1-1/4 | 3-1/2 |
| EMG60-2020 | 5/8 | 5/8 | 1-1/4 | 3-1/2 |
| EMG60-2424 | 3/4 | 3/4 | 1-1/2 | 4 |
| EMG60-3232 | 1 | 1 | 1-1/2 | 4 |
Tolerance +.000 / - .002
| Part # | Mill Diameter |
Shank Diameter |
Flute Length |
Overall Length |
| AAMG-402 | 1/16 | 1/8 | 3/16 | 1-1/2 |
| AAMG-403 | 3/32 | 1/8 | 9/32 | 1-1/2 |
| AAMG-404 | 1/8 | 1/8 | 1/2 | 1-1/2 |
| AAMG-605 | 5/32 | 3/16 | 1/2 | 2 |
| AAMG-606 | 3/16 | 3/16 | 5/8 | 2 |
| AAMG-807 | 7/32 | 1/4 | 5/8 | 2-1/2 |
| AAMG-808 | 1/4 | 1/4 | 3/4 | 2-1/2 |
| AAMG-1010 | 5/16 | 5/16 | 13/16 | 2-1/2 |
| AAMG-1212 | 3/8 | 3/8 | 7/8 | 2-1/2 |
| AAMG-1414 | 7/16 | 7/16 | 1 | 2-3/4 |
| AAMG-1616 | 1/2 | 1/2 | 1 | 3 |
| AAMG-2020 | 5/8 | 5/8 | 1-1/4 | 3-1/2 |
| AAMG-2424 | 3/4 | 3/4 | 1-1/2 | 4 |
| AAMG-3232 | 1 | 1 | 1-1/2 | 4 |
Tolerance +.000 / - .002
| Part # | Mill Diameter |
Shank Diameter |
Flute Length |
Overall Length |
| AAMG-808-L | 1/4 | 1/4 | 1-1/8 | 3 |
| AAMG-1212-L | 3/8 | 3/8 | 1-1/8 | 3 |
| AAMG-1616-L | 1/2 | 1/2 | 2 | 4 |
Due to the fact that we are continuously improving our products, the descriptions, illustrations,
specifications,dimensions, and part numbers are subject to change without notice.
Every effort has been made to have the information on this site error free, we can not be responsible for errors and or omissions.
Airtek (1990) Ltée, 5750 Donahue St., Montreal, Qc, Canada, H4S 1C1
Tel: 514-336-3820